User manual

Compact Scaler Switcher (with PoC)
PTN Electronics Limited 5 www.PTN-electronics.com
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3) All devices should be connected before power on.
3.2 System Diagram
3.3 Connection Procedure
Step1. Connect HDMI source devices (e.g. Blue-ray DVD) to HDMI input ports of SC51T
with HDMI cable. Connect VGA source device (e.g. PC) to VGA input ports of
SC51T with VGA cable.
Step2. Connect the corresponding audio source to the corresponding AUDIO INPUT
port of SC51T with audio cable one to one. The audio of HDMI can be embedded
or external by sending right command.
Step3. Connect HDMI display device to HDMI output port of SC51T with HDMI cable.
Step4. Connect TPHD402PR to HDBaseT output port of SC51T with twisted pair.
Step5. Connect speaker, headphone or PTN amplifier to AUDIO OUTPUT port of
SC51T.
Step6. Connect control device (e.g. PC) to RS232 port of SC51T or TPHD402PR
(bi-directional RS232 control, either is available).
Step7. Both SC51T and TPHD402PR have IR IN and OUT. When one model is used for