User manual

Compact Scaler Switcher (with PoC)

PTN Electronics Limited 26 www.PTN-electronics.com

YPbPr2 source.

2. Via RS232 commands

Send command 50681% (or 50684%) to switch to YPbPr1 (or YPbPr2) source.

3. Via IR remote & OSD

Press MENU button on IR remote to enter in OSD, and then enter in OPTION

setting menu: set “INPUT 4 Select” to YPbPr1, and “INPUT 5 Select” to YPbPr2.

After setting, press INPUT 4 (or INPUT 5) button to switch to YPbPr1 (or YPbPr2)

source.

B. Connecting the VGA converting cable like this:

 Connect with Composite Video (C-VIDEO) Source

A. Operation Examples:

1. Via front panel buttons & OSD

Press MENU button on front panel to enter in OSD, and then enter in OPTION

setting menu: set “INPUT 4 Select” to AV1, and “INPUT 5 Select” to AV2. After

setting, press SOURCE/AUTO button on front panel to switch to AV1 or AV2