User manual

Compact Scaler Switcher (with PoC)
PTN Electronics Limited 25 www.PTN-electronics.com
4.5.4 Setup
Including OSD Language, Blending, HDMI CEC and OSD Duration.
OSD Language: Supports 14 languages, including English (default), Chinese etc.
Blending: Includes Low, Middle, High and Off. Use ENTER button to select.
HDMI CEC: Enable/disable CEC and auto-standby function. Default: CEC on,
STANDBY on.
OSD Duration: Includes 5 s, 10 s, 15 s and Off. “s” is for Second.
4.6 Instructions of VGA Converting Cable
As VGA source supports YPbPr and C-video source, SC51T provides with 2 VGA
converting cables to compliant with these signals.
When need to select these signals as input source, please switch to channel INPUT 4
(or INPUT 5), and then set the signal type in OSD. And then switch to other input
channel and connect INPUT 4 (or INPUT 5) with corresponding source device. At last,
please switch to INPUT4 (or INPUT 5) again.
 Connect with Component Video (YPbPr) Source
A. Operation Examples:
1. Via front panel buttons & OSD
Press MENU button on front panel to enter in OSD, and then enter in OPTION
setting menu: set “INPUT 4 Select” to YPbPr1, and “INPUT 5 Select” to YPbPr2.
After setting, press SOURCE/AUTO button on front panel to switch to YPbPr1 or