User manual

Compact Scaler Switcher (with PoC)
PTN Electronics Limited 20 www.PTN-electronics.com
4.4.4 Control SC51T or 3rd Party Device from Local
Firstly, connect the RS232 port of SC51T to RS232 port of PC.
Secondly, send command 50787% (serial control mode 1, factory default) via RS232
communication software.
Lastly, send the right command of SC51T or other remote RS232 device connected in
present system. Connect as below:
Control SC51T or 3rd party device from local
4.4.5 Control SC51T from Local or Remote
 Control SC51T from local
Firstly, connect the RS232 port of SC51T to RS232 port of PC.
Secondly, send command 50788% via RS232 communication software.
Lastly, send the right command to control SC51T. Connect as below: