User manual

Compact Scaler Switcher (with PoC)
PTN Electronics Limited 19 www.PTN-electronics.com
50676%
Stretch upwards from top side (increase
image height)
ADJUST OUTPUT
HEITHT XX
50677%
Stretch upwards from down side (decrease
image height)
ADJUST OUTPUT
HEITHT XX
50678%
Enable screen output adjusting (then able
to adjust screen output through OSD menu)
Open output position
adjust
50679%
Disable screen output adjusting
Close output position
adjust
50680%
Select VGA source for INPUT 4 (VGA 1)
Input4 Select VGA1
SWITCH TO VGA1
50681%
Select YPbPr source for INPUT 4 (VGA 1)
Input4 Select YPbPr1
SWITCH TO YPbPr1
50682%
Select C-video source for INPUT 4 (VGA 1)
Input4 Select AV1
SWITCH TO AV1
50683%
Select VGA source for INPUT 5 (VGA 2)
Input5 Select VGA2
SWITCH TO VGA2
50684%
Select YPbPr source for INPUT 5 (VGA 2)
Input5 Select YPbPr2
SWITCH TO YPbPr2
50685%
Select C-video source for INPUT 5 (VGA 2)
Input5 Select AV2
SWITCH TO AV2
50686%
Enable CEC
Enable HDMI CEC
50687%
Disable CEC
Disable HDMI CEC
50791%
HDCP on
HDCP ON
50792%
HDCP off
HDCP OFF
50699%
Check the system version
VX.X.X
Note: For the command with background color, it is available only when switched
to corresponding input port.
For example, when switched to INPUT1 (HDMI1), and then choose HDMI
embedded audio/external audio as HDMI audio of this port, it can be successfully
set, and the feedback is “set in HDMI1 port”.