User manual

Compact Scaler Switcher (with PoC)
PTN Electronics Limited 14 www.PTN-electronics.com
CEC: Control HDMI source devices by IR remote of SC51T
4.4 Operations of RS232 Control
As RS232 can be transmitted bi-directionally between SC51T and TPHD402PR, so it is
able to control a third party RS232 device from local or control SC51T from remote.
When to control a third party RS232 device, the baud rate of this device should be 2400,
4800, 9600, 19200, 38400, 57600 or 115200.
4.4.1 Installation/uninstallation of RS232 Control Software
 Installation Copy the control software file to the computer connected with SC51T.
 Uninstallation Delete all the control software files in corresponding file path.
4.4.2 Basic Settings
First to connect SC51T with all input devices and output devices needed, then to
connect it with a computer which is installed with RS232 control software. Double-click
the software icon to run this software.
Here we take the software CommWatch.exe as example. The icon is showed as below:
The interface of the control software is showed as below: