User manual

PS121 Presentation Switcher
10
PTN Electronics Limited www.PTN-electronics.com
0800% Check the volume
DVI 1 Volume: XX (0~60)
DVI 2 Volume: XX (0~60)
DVI 3 Volume: XX (0~60)
DVI 4 Volume: XX (0~60)
AV 1 Volume: XX (0~60)
AV 2 Volume: XX (0~60)
AV 3 Volume: XX (0~60)
AV 4 Volume: XX (0~60)
VGA 1 Volume: XX (0~60)
VGA 2 Volume: XX (0~60)
VGA 3 Volume: XX (0~60)
VGA 4 Volume: XX (0~60)
MicVolume: XX (0~60)
0801%
Set band rate to 4800 bps
Baud rate: 4800
0802% Set band rate to 9600 bps Baud rate: 9600
0803%
Set band rate to 19200 bps Baud rate: 19200
0804%
Set band rate to 38400 bps Baud rate: 38400
0805% Set band rate to 57600 bps Baud rate: 57600
0806%
Set band rate to 115200 bps Baud rate: 115200
/+1xxxx;
Following the DVI switch, RS232/RS485
Series command: XXXXXXX
232/485 DVI data: XXXXXXX
/+2xxxx;
Following the AV switch, RS232/RS485
Series command: XXXXXXX
232/485 AV data: XXXXXXX
/+3xxxx;
Following the VGA switch,
RS232/RS485 Series command:
XXXXXXX 232/485 VGA data: XXXXXXX
/+0xxxx;
Direct output series by RS232/RS485
output: XXXXXXX 232/485 Direct out data: XXXXXXX
0900%
Change all volume input mode Change to output vol control/Change to
input vol control
31XX%
Set DVI 1 volume to XX
DVI 1 Volume : XX 0~60
32XX%
Set DVI 2 volume to XX
DVI 2 Volume : XX 0~60
33XX%
Set DVI 3 volume to XX
DVI 3 Volume : XX 0~60
34XX%
Set DVI 4 volume to XX
DVI 4 Volume : XX 0~60
41XX%
Set AV 1 volume to XX
AV 1 Volume : XX 0~60
42XX%
Set AV 2 volume to XX AV 2 Volume : XX 0~60
43XX%
Set AV 3 volume to XX
AV 3 Volume : XX 0~60
44XX%
Set AV 4 volume to XX
AV 4 Volume : XX 0~60
51XX%
Set VGA 1 volume to XX
VGA 1 Volume : XX 0~60
52XX%
Set VGA 2 volume to XX
VGA 2 Volume : XX 0~60
53XX%
Set VGA 3 volume to XX
VGA 3 Volume : XX 0~60
54XX%
Set VGA 4 volume to XX
VGA 4 Volume : XX 0~60