User manual

DVI Video Processing Switcher 4x4
PTN Electronics Limited 24 www.PTN-electronics.com
 Overlay Hierarchical Relationship Setting
Overlay Hierarchical setting in MV4 is applied for PIP display mode. In the following
picture Figure 5-22, L1 (Level 1) is the bottom layer, and L4 (Level 4) is the top layer.
The operation area is at the bottom of the main interface. The radio button All is for
setting on all channels and Different is for setting on a single channel.
Figure 5-22 Overlay Hierarchical Relationship Setting
 Output Display On/Off
It is used to display/undisplay the output image of one channel. Select the check
boxes and press the button Set to confirm. As shown in Figure 5-23.
Figure 5-23 Output Display On/Off
 Communication Information
This area is to check the connecting status between the computer and MV4 (showed
in Figure 5-24), and choose a proper connection way to check if it is well connected.
The detailed information is showed on the right side of the picture.
Note: If the adjusting image does not synchronize with the output images show on the
displays, please press the button .
Figure 5-24 Additional Function Setting