User manual

DVI Video Processing Switcher 4x4
PTN Electronics Limited 23 www.PTN-electronics.com
5.5.2 Settings in the Function Area on the Main Panel
 Resolution Setting
MV4 supports various resolutions, such as 1080P (1920*1080), 720P (1280*720),
WUXGA (1900*1200), UXGA (1600*1200), SXGA (1280*1024) and XGA (1024*768).
The operation area is at the left bottom corner of the main interface. As shown in
Figure 5-20.
Figure 5-20 Resolution Setting
In Full Displaying mode it supports to change the output resolution respectively. In
other modes, the resolution of all outputs only can be set as a whole. Select the check
box Full mode to set the resolution of single channel, and deselect this check box to
set the resolution of all channels as a whole. And then press the button Set to confirm.
The default resolution is 1080P (1920*1080).
 Input Channel Setting
MV4 supports to assign one input image to one output channel (not the physical output
interface connected with the displayer).
The operation area is at the bottom of the main interface, as shown in Figure 5-21.
Figure 5-21 Channel Input Selection