User manual

DVI Video Processing Switcher 4x4
PTN Electronics Limited 21 www.PTN-electronics.com
 The Third Auxiliary Function Area
In this area, users can set the bezel size of the adjacent images in zoom-in model, to
make the whole image looks coherently. As shown in Figure 5-17.
Figure 5-17 The Third Auxiliary Function Area
When in 3x zoom-in mode and 4x zoom-in mode, press the button Get to get the pezel
information of the image. Enter into a new value and press the button Set to confirm.
Figure 5-18 and Figure 5-19 will show you the difference between the original image
and the image adjusted.
Note:
1) Bezel size setting is mainly used when there is offset between the images on the
displayers.
2) In Figure 5-18, the position of the images on the left side is lower than the right
ones. The place marked with circle shows the effect that the images joined (before
& after).