User manual

DVI Video Processing Switcher 4x4
PTN Electronics Limited 17 www.PTN-electronics.com
Figure 5-10 The Fourth PIP Display Effect
Figure 5-11 The Fifth PIP Display Effect
5.4.5 Picture outside Picture (POP) Displaying
Function: To show the output images of different channels on a single screen. It means
that while the screen is showing the frame of the main video, any of the other three
input images (Had been compressed) also can be showed on this screen, but locate
beside the main image. That makes users be able to monitor the other input images. In
one word, it means that the other three images are just beside the main image.
Detailed operations: While the software is running normally, click on the button
, , or , the display mode area on the software interface will show
the display effect of all the four input channels. The images (all are complete) on any
output channels are made by the four input images.
The buttons are used for checking the output
Effect
Button
From input 3, second layer.
From input 2,
third layer
From input 1,
bottom layer
From input 4, top layer.
Effect
Button
From input 2
From input 4
From input 3
From input 1,
bottom layer