User manual

DVI Video Processing Switcher 4x4
PTN Electronics Limited 15 www.PTN-electronics.com
5.4.3 Matrix Switching Function (Full Displaying)
Function: To choose one or all the input images of the four input channels and then
output to the four output displays. As shown in Figure 6-4. The default
correspondence between the four displayers is like .
Detailed Operations: While the software is running normally, click on the button ,
the display mode area on the software interface will show the output display mode of
any one of the input channels. The image of each displayer is the same with the
corresponding input image.
And click on the button , the display mode area on the software interface will
show the output display mode of any one of the input channels. The output images are
the same with each other and also the same with the input image. As shown in Figure
6-5.
5.4.4 Picture in Picture (PIP) Displaying
Function: MV4 is able to present all the input images of the four channels on a single
screen. It means that while the screen is showing the main video, any of the other
three input images (Had been compressed) also can be showed on this screen. That
makes users be able to monitor other input images. In one word, it means to overlay
the main video and the deputy images together.
Detailed operations: While the software is running normally, click on the buttons
, , , or , the display mode area on the software
interface will show the display effect of all the four input channels. The images (at most
three are complete) on any one displayer are made by the four input images.
The buttons are used for checking the output
image of any one channel. The display effects are showed in Figure 5-7 to 5-11.