User manual

DVI Video Processing Switcher 4x4
PTN Electronics Limited 13 www.PTN-electronics.com
5.3.2 Connection Button
Function: Select a control way to activate the system functions.
Detailed operations: As mentioned in 5.1.2.
5.3.3 View Button
Function: To set the display modes and to reset the software.
Detailed operations: Click on the menu button View, the sub menu item Mode Setting
is to show the current display mode, more details please check part 5.6.
Window Adjustment is to auto adjust the window of software to fit control computer.
Factory Reset is to clear the system stored information and it will display in 4x full
screen zoom-in mode.
5.3.4 Help Button
Function: Check the version of the software and the firmware of MV4.
Detailed operations: Click the sub menu About Soft Version to check the version of
the software or the firmware. As shown in Figure 5-5.
Figure 5-5 Check the Software Version
5.4 Main Function Settings
The main function area of the control software includes 4x full screen zoom-in
displaying, 3x zoom-in displaying, matrix switching displaying, PIP(picture in picture)
displaying, POP(picture outside picture) displaying, output image switching function
and customizable shortcut button. The detailed information is showed in Figure 5-6.
Figure 5-6 Main Functional Area
Note: When in any one of the five modes (4x full screen zoom-in mode, 3x zoom- in
mode, matrix switching mode, PIP mode, and POP mode), please notice the following
information.
1) When in distribution display mode or in matrix switching display mode, it is able to
set the resolution of any single output by checking the option box full mode, and
also able to set as a whole resolution. But not able when in any one of the other
four modes.
2) It is not able to set the correspondences between the inputs (Channel input switch)
and the four outputs.