User manual

SDI to HDMI Converter
PTN Electronics Limited www.PTN-electronics.com
2
2. Product Appearance of CSH2
Figure 1 Product Appearance of CSH2
Detailed Connection Instructions:
Notes: Please connect the cables reference to Figure 1. The LEDs indicated
information is showed as below.
 PWR: Power indicator, turns red when normal power on, and turns off when power off.
 LOCKED: Check if there is input signal, flashes when there inputs a signal, and keep
on when the signal is locked.
No.
Module
Function
①
LED
Check if the system is working in a normal state, and feed
back the abnormal information in time.
②
AUDIO OUT
Audio output port, with left and right audio channel for mono
output. Using single mode optical fiber for long distance
digital audio transmission.
③
HDMI OUT
Video output port, output the signal after turning the SDI
signals to HDMI/DVI signal via this port.
④
Dial Switch
Selector switch of HDMI and DVI output selection.
Turn the key 1 to the upside, output HDMI signal.
Turn the key 1 to the underside, output DVI signal.
Key 2 is kept for future extending or updating.
⑤
SDI IN
SDI signal input port, use to access stable SDI source signal.
⑥
SDI LOOP
Looping output SDI signal.
⑦
DC 5V
Port for accessing power supply, DC 5V.