Technical data

5
4. Functions of the Camera (icons can be displayed on the
screen when the option DISPLAY of the camera is ON，Only
for 18×Camera)
a. Description of the Focus Control Mode: the user can adjust
the focus of the camera manually. When the camera is on near
focus, the icon appears on the screen; when on the nearest
state, the icon appears while on the far focus, the icon
appears.
b. Description of Backlight Compensation: when the object to be
shot is dark and looks dim, the user can open the backlight
compensation according to actual need and the icon
appears on the screen.
c. Description of White Balance: when the image has color
distort on the screen, the user can set different modes by orders.
There are 6modes for options: ① Indoor Mode ②
Outdoor Mode ③ Touch Mode ④Automatic Trace of
White Balance ATW ⑤ Manual WB-MAN ⑥ Automatic
Mode.
d. Description of ZOOM Control: us
er can “pull near”or “push
far”the lens according to actual conditions, and the symbol
appears on the screen in which the front part
means optical multiplication while the rear part means digital
multiplication.
e. Description of Electronic Shutter: it is fixed on 1/50 sec after
initialization when the camera is switched on, and the digital 50
appears on the screen.
f. Setup of Image Effect: the camera works on OFF state under
normal condition and no image effect symbol appears on the
screen. When “B&W”appears on the screen, it means the
camera is on black and white state.
g. AE Mode: setup of Manual/Automatic.
h. Minimum illumination: It is used only when the external
brightness is extremely low. Normally the camera works on the
automatic state. In case the external brightness is lower than
1Lux, the camera can be switch to the Zero illumination state
automatically and icon appears on the screen. You can also
set the Zero illumination state manually.