Technical data

-
28
have it’s own menu, to
open/close the menu
by the command “turn
on the OSD”, and use
the command “turn off
the OSD”to open/close
the OSD)
58 Digital Zoom On Off
59 FOCUS Auto Manual
60 IRIS Auto Manual
61 Auto Manual
62 Indoor Outdoor
63
White Balance Mode
ATW One Push WB
64
Frame pile
function switch
able
Table 7
7. Troubleshooting
Problems Possible Causes Remedies
Power supply fault Replace
Bad connection of the power Correct
No action when
power is
switched on
Transformer damaged Replace
Mechanical failure Repair
Camera inclined Reinstall
Abnormal
self-check.
Images with
motor noise
Power supply not enough Replace
Video signal fault Reinstall
Bad connection of the video Press to connect well
Normal
self-check but
no images
Camera damaged Replace
RS485 bus bad connection
Check the RS485
connection
Normal
self-check but
out of control
Dome ID setup is wrong Reselect