Technical data

(Figure 28)

3) Take out system control wires from the bracket(Figure 29)

4) Fixes the ball cover to the support above(Figure 30)

5) System pilot wire after (Figure 15) marking meets, after the

electricity then controlled the ball machine for the system on.

Figure 28 Figure 29 Figure 30

6. To Ensure a Smooth and Successful Installation, You Should:

1) Have electrical work to comply with latest national electrical

code, national fire code, and all applicable local codes and

ordinances.

2) Coordinate with other trades to avoid interference.

3) Verify existing conditions on the site and coordinate with owner

side to ensure necessary utilities available.

4) Copy all related plans, specifications, shop drawings and

attachments to schedule and coordinate related work.

5) Thoroughly review the project to ensure that all jobs should

meet or exceed the above requirements. Contact with the

CCTV Project Coordinator to draw attention in case alleged

discrepancies occur.