Technical data

11
Both top and bottom lines display prompt and information of each
patrol is displayed on the middle of the screen. Data of 2 Patrol
points appears on one line. Move cursor by PAN LEFT/RIGHT
and modify data by TILT UP/DOWN. Press buttons for one second
to speed up operation. Press CLOSE button to exit edit state and
store modifications. The program will search the position of the
first “---”of POS, store dada before it and regard data after it as
invalid. In above figure, the program stores previous four points
with settable range from 1 to 63 and from 65 to 128. When “---”of
POS appears, the tour range is ended. The settable range of SP is
from 0 to 8 (0 and 1 are the same with fastest speed while 8 has
the lowest speed). The settable range of TM is from 0 to 99
seconds.
3.2 Operation of Title of Preset Point in Edit State.
When entering into edit state the
screen displays as follows:In the
figure we find the preset point is No.1
with title of “NO TITLE”. Move cursor
by PAN LEFT/RIGHT and modify data
by TILT UP/DOWN. Press buttons for
one second to speed up operation.
Press CLOSE button to exit edit state and store modifications. The
title of preset point has 8 characters in maximum such as 0-9, A-Z,
+, - and space. Note: the first character should be 0-9 or A-Z,
otherwise it means to delete the title of the preset point, and when
preset point is adjusted, only “NO.XXX”spears without title to be
displayed.