Technical data

2.5 CAMERA MASK SET

2.5.1 MASK PRIVACY: ON/OFF

2.5.2 MASK SHADE: BLACK/GRAY/WHITE

2.5.3 MASK REGION: 6 or 2 privacy zone

masking.(only for part of camera)

2.5.4 RETURN: return to Main Menu

2.6 PROGRAM Options

2.6.1 AUTO PAN START POS: To set start

position of auto scan between two

points. To move the dome camera by

joystick after entering and to return by

CLOSE button.

2.6.2 AUTO PAN END POS: To set end

position of auto scan between two

points. To move the holder by joystick after entering and to return

by CLOSE button.

2.6.3 RUN AUTO PAN: Auto scan function between two points. First of

all, you must set the start position and the end position of auto

scan. If the start position is just the end position, it means 360°

scan. The speed of auto scan has six grades: FAST / NORMAL /

SLOW / -FAST / -NORMAL / -SLOW in which the first three

grades are scan less than 180°while the later three grades

larger than 180°. Adjust speed by PAN LEFT/PAN RIGHT, and

operate and exit by OPEN button. The start position and the end

position of auto scan are set by options 1 and 2 in this submenu.

2.6.4 SET TITLE: to edit titles of preset position. Only previous 63

preset points have their titles. Select no. of preset position by

PAN LEFT/PAN RIGHT, enter into edit by OPEN button and exit