Technical data

8
2.3.7 WB SET: setup of white balance. ATW / INDOOR / OUTDOOR /
ONEPUSH / AUTO / MANU
2.3.8 MENU OF CAM: blank
2.3.9 RETURN: return to MAIN MENU
2.4 CONTROL SETUP
2.4.1 AUTO FLIP: 180°automatic flip of dome
camera ON/OFF.
2.4.2 ALARM: ALARM ON/OFF switch
2.4.3 PRESET PIC: NOP
2.4.4 HOME OPTION: enter the submenu of
automatic home function.
2.4.4.1 AUTO HOME: when it is set at ON,
home function is available, namely, the
dome camera will return HOME if user has no action in a
period of time. The dome camera shall not return HOME if it is
on tour state. If no HOME is needed when the dome camera is
stopped, set the option at OFF.
2.4.4.2 HOME POS:HOME means return home. For example to set
one scene as HOME, call the scene first and set it as preset
point, then call out the menu to enter into this submenu,
change figures after HOME POS into 5. If automatic HOME
function is needed, do not forget to set AUTO HOME at ON.
This option display 1— 50/RESTORE/PATROL1；1— 50 means
preset position from 1 to 50; RESTORE means return back to
before state (manual control); PATROL1 means run the first
patrol.
2.4.4.3 DWELL TIME:to set the time of automatic HOME, which means
the camera shall return HOME if it is not controlled in a period
of time which can be from 1 to 99 minutes.
2.4.4.4 RETURN: return to the menu one level higher.
2.4.5 RETURN: return to MAIN MENU.