Technical data

7
2.1.7 CAM DEFAULT SET: to reset default setup of camera.
2.1.8 DOME RESET: to reset the dome camera.
2.1.9 EXIT: to quit the main menu.
2.2 DISPLAY SETUP
2.2.1 ID DISPLAY: when it is set at ON,
address of dome camera appears on
the screen such as “CAM 001”. The
default setting is ON.
2.2.2 ID POS: to set the display position of
address on one of following corners:
TOP-L, TOP-R, BOTT-R and BOTT-L.
2.2.3 TITLE DIS: when it is set at ON, the title of preset point appears
on the left of screen such as "NO.001 ABCDEFGH”when the
preset point is called. The modification of title of preset point is
set on PROGRAM option.
2.2.4 TITLE POS: to set the display position of title of preset point from
Line 1 to Line 10. Line 1 is at the top of screen.
2.2.5 CAM DISPLAY: when it is set at ON, the camera screen will be
opened.
RETURN: to return to MAIN MENU.
2.3 CAMERA SETUP
2.3.1 SLOW SHUTTER: frame accumulation with
two options Manual/Automatic. When
camera screen is opened under automatic
state, ASS displays on screen.
2.3.2 BACK LIGHT: backlight compensation
ON/OFF.
2.3.3 ICR SHOT: low shooting，ON/AUTO
2.3.4 IRIS: setup of automatic iris AUTO/MANU.
2.3.5 D-ZOOM: setup of digital zooming ON/OFF.
2.3.6 FOCUS: setup of automatic focusing AUTO/ MANU.