Technical data

6
3. Setup of the Menu of the Dome Camera
1. Basic Operation of the Menu
1.1 Call preset 64 or call preset 1 twice within 4 seconds to enter the
main menu by the control keyboard or by the matrix.
1.2 When the menu is displayed on the screen, operate “TILT UP”,
“TILT DOWN”to move the cursor to the option to be set, operate
“PAN LEFT”, “PAN RIGHT”to modify the content or the order to
enter this option.
1.3 Keep the joystick in one direction for over 1 second to speed up
operation.
1.4 All setups on the menu couldn’t be lost even power failure
happens.
1.5 Special utilizations can be seen on the descriptions of functions of
the menu in detail.
2. Setup of the Menu
2.1 MAIN MENU
2.1.1 DISPLAY SETUP: to enter the submenu of
display of the screen by which ID display,
title display of preset point and display of
camera screen can be set.
2.1.2 CAMERA SETUP: to enter the submenu of
setup of normal data of camera.
2.1.3 CONTROL SETUP: to enter the submenu
of setup of control data over the dome
camera.
2.1.4 CAMERA MASK SET: to enter the submenu of setup of mask
function of camera.
2.1.5 PROGRAM: to enter the setup of enhanced function of dome
camera.
2.1.6 PAL CAMERA: PAL/NTSC switching to suit the camera.