Phau Ntawv Qhia
11
WALL THERMOSTAT TERMINAL
(OPTIONAL)
IMPORTANT: Only trained, qualified personnel
should access electrical panel on unit and install
electrical accessories. Please contact your local
electrical contractor, dealer, or distributor for
assistance.
Thermostat Wire Routing
Thermostat wire is eld supplied. Recommended wire gauge
is 18 to 20 gauge solid thermostat wire.
NOTE: It is recommended that extra wires are run
to unit in case any are damaged during installa-
tion. Thermostat wire should always be routed
around or under, NEVER through, the wall sleeve.
The wire should then be routed behind the front
panel to the easily accessible terminal connector.
Figure A - Proper Wiring Routing Beneath Unit
NOTE: Refer to thermostat installation instruc-
tions for details on installing wall thermostat.
Installation Instruction of Some Types of Wall
Thermostat
(You can Consult with the sales agency or manufacturer for
details) Pull the dip switch to the DOWN (OFF) position as
shown below.
Insert the wire connector of the wall thermostat into the rele-
vant terminal according to dierent shapes as shown below.
Installation Instruction of PTAC Other Wall
Thermostat
Remove the two screws as shown below and take the cover
panel down.