User's Manual

7. In a first time use only two screws (M2 x 6 mm) provided to secure the metal shield in place.
Put only these two
screws at this stage
8. Fix the RFID Coupler into place on the top of the metal shield. The RFID coupler has to be
aligned at the centre of the WORKABOUT PRO and respect the following distance from the
metal shield :
9. Snap the serial connector into the RFID coupler connector :
RFID Coupler
5 mm
3 mm
RFID coupler connector
April 07, 2010
DPD A00515 A00 Sheet 6 of 12