User's Manual

5. Connect the power supply cable of the Interface board on the Power connector of the GPRS
Radio module. Then, align the serial cable like in the picture below.
April 07, 2010
DPD A00515 A00 Sheet 5 of 12
6. Settle the metal shield into place on top of the GSM/GPRS expansion module. It aligns to the
same screw holes as the expansion module.
Serial cable
Power connector
Power supply cable
Metal shield
Be careful to well align the serial cable and not to pinch the serial cable
with the metal shield. And put the end of the serial cable under the
plastic.