User's Manual

August 29, 2007
DPD A00299 A20 Sheet 2 of 3
• Connect the RFID Antenna UHF-A5 to the RFID Coupler UHF-CA2.
• Slide the switch to the position ON to turn power back on.
• Replace the end-cap, back plate and batteries.
For detailed instructions, pleased refer to the WORKABOUT PRO G2 Hand-Held Computer User Manual
and to the RFID MODULE UHF-CA2-A5 User manual. These manuals are available on our website
www.psionteklogix.com
through the Teknet extranet
Important:
The WORKABOUT PRO G2 with the RFID option must not be held closer than 20 cm
from the rest of the body. This product must not be used in a holster or on a belt-clip.
READING AREA:
This area depend of the TAG type, TAG packaging, configuration of the WORKABOUT PRO G2
(scanner, Compact flash…), environment (metallic or not).