User manual

POWERSCAN
™
D8330/M8300
28
7. Read the Bind code to pair the PowerScan
™
M8300 to the BC-80X0 cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following paragraph 4.5.1,
‘Using Multiple M8300 Series Readers with Same Cradle'.
Bind
Ì$+RN0$-IÎ
The green LED on the PowerScan
™
M8300 will blink; the reader is ready to
be inserted into the cradle.
8. Firmly insert the reader into the BC-80X0 cradle within 10 seconds, a beep will
be emitted, signaling that the BC-80X0 cradle has been paired to the
PowerScan
™
M8300, and the green LED on the reader will go off.
9. Read the BC-80X0 restore default code:
Restore BC-80X0 Default
Ì$+RX0$-qÎ
Go to section 4.8, Interface Selection.
Green LED