User manual

INSTALLATION
11
2.9 POWERSCAN
™
M8300 BATTERY MAINTENANCE
2.9.1 Battery Charging
Once the system is connected and powered, you can place the PowerScan
™
M8300
into the cradle to charge the battery.
When the reader is correctly inserted in the cradle, the "Reader" red LED on the
cradle goes on to indicate that the battery is charging. The "Reader" green LED on
the cradle goes on when the battery is completely charged.
2.9.2 Replacing PowerScan
™
M8300 Batteries
To change the batteries in your PowerScan
™
M8300 scanner, press the black button
or unscrew the fixing screw on the handle cover and extract the battery pack from
the reader handle.
When the batteries are extracted from the scanner, the timer maintains the
current hour and date for about 1 minute.
NOTE
Replace the old battery pack with a new one by inserting it within the reader handle
and pushing it until it clicks.
Do not incinerate, disassemble, short terminals or expose to high
temperature. Risk of fire, explosion. Use specified charger only. Risk of
explosion if the battery is replaced by an incorrect type. Dispose of the
batteries as required by the relevant laws in force.
WARNING
1
2