User manual

POWERSCAN
™
D8330/M8300
188
PEN (continued)
DESCRIPTION STRING
Output Level normal DD0
inverted DD1
Idle Level normal DE0
inverted DE1
Overflow narrow overflow DH0
medium overflow DH1
wide overflow DH2
Inter-block Delay (100 ms) CK00-CK99
NETWORK
DESCRIPTION STRING
RS-485 Network Disable Network RZ0
Enable RS-485 Slave RZ1
Enable RS-485 Master RZ2
Slave Address Range Minimum Address JB0000-1999
Maximum Address JC0000-1999
Network Baud Rate 9600 JE0
19200 JE1
38400 JE2
Network Warning Message not transmitted JG0
transmitted JG1
Transmission Warning not transmitted JH0
Message transmitted JH1
Master Header no header JA00
one character JA01 x
two characters JA02 xx
three characters JA03 xxx
four characters JA04 xxxx
five characters JA05xxxxx
six characters JA06xxxxxx
seven characters JA07xxxxxxx
eight characters JA08xxxxxxxx
Master Terminator no terminator JA10
one character JA11 x
two characters JA12 xx
three characters JA13 xxx
four characters JA14 xxxx
five characters JA15xxxxx
six characters JA16xxxxxx
seven characters JA17xxxxxxx
eight characters JA18xxxxxxxx
x
= Hex value from 00 to FE representing an ASCII character