User manual

Enter Configuration
Exit and Save
Ì$+;Î
CODE SELECTION
Ì$
-
?Î
102
CODE 128 FAMILY
disable the family
ÌAI0]Î
 Read the desired family code
 Code 128
ÌAI11=Î
control without transmission of
check digit
ISBT 128
EAN 128
ÌAI31CÎ
enabling ISBT 128 automatically
disables Puzzle Solver™.
ÌAI21@Î
control without transmission of
check digit
TRANSMIT GS BEFORE CODE
Code EAN 128 uses the ASCII <GS> character to separate a variable length code field from the
next code field. This character can also be transmitted before the code.
 disable
ÌEQ0qÎ
enable
ÌEQ1tÎ
If the <GS> character has been modified in the Character Replacement parameter, the new
character is affected by this command.
CODE LENGTH (OPTION
A
L
)
The code length selection is valid for the entire Code 128 family and is calculated on the output
string.
Read the code + 4 numbers for the code length where:
set code length
First 2 digits = minimum code length.
Second 2 digits = maximum code length.
ÌAILJÎ
The maximum code length is 99 characters.
The minimum code length must always be less than or equal to the maximum.
Examples: 0199 = variable from 1 to 99 digits in the code. 1010 = 10 digit code length only.