User manual

Chapter 6: Operating System & Software Apps
Psion Teklogix Config Menus
74 8580/8590 Vehicle-Mount Computer User Manual
6.2.3.4 Special Switch-On/Off Features
This message is displayed upon activating a switch-on option with ignition:
Figure 6.1 Automatic Switch-On Message
This information appears for safety reasons each time a switch-on with ignition option is
activated.
Without Automatic Switch-Off
The following symbol is displayed in the uppermost line of the dialog if the automatic
switch-off software is not functioning properly:
All switch-on options are available; however, when switching off, the options with ignition
cannot be selected.
With Automatic Switch-Off
When the automatic switch-off option is functioning, the following symbol is displayed in
the dialog:
When the switch-on option with ignition or always on is chosen, switching off using the
power key is not possible.
If the option Switch-off with power key was previously selected, a corresponding message is
displayed to the user. Then the switch-off option is automatically set to only by system shut-
down and the option with power key cannot be selected.
Shutdown to hiberna-
tion mode
If the computer is switched off using the ignition or the power
key, it goes into hibernation mode. When this happens, a copy
of the main memory is written to a file, accelerating the startup
of the computer. This option must be activated in the power
management centre of the computer (Power Properties).