User manual

Chapter 4: 8580/8590 Installation
Mounting Bracket Toolkit
44 8580/8590 Vehicle-Mount Computer User Manual
4.2.1 Mounting Bracket Toolkit
The following tools are required for positioning the 8580/8590 mounting bracket:
• For mounting and positioning the stationary mounting bracket: Hexagonal socket
wrench (Allen key) sizes 5 mm and 6 mm
• For mounting and positioning the mobile mounting bracket: Hexagonal socket wrench
(Allen key) size 6 mm
4.2.2 Permitted Mounting Positions
The permitted mounting positions of the 8580/8590 are defined as follows:
4.2.3 Mechanical Dynamic Loading
Since the 8580/8590 is a weighted structure, the unit will be subject to mechanical dynamic
effects. Therefore optimizing the mounting can be very helpful.
Refer to Appendix F: “Mechanical Dynamic Loading” for details.
5 mm Allen Key
6 mm Allen Key
From a minimum of -90° Up to a maximum of +90°
Important: The unit can only be mounted in a range of 180° as illustrated.