User manual

Chapter 4: 8580/8590 Installation
Cable Cover, Grounding Bar & Cables – Assembling
42 8580/8590 Vehicle-Mount Computer User Manual
• Insert the sealing rings and cables with silicone in the cable openings of the cable
cover.
• Fix the cables firmly to the grounding plate.
6. Insert sealing plugs into the unused cable openings, and seal each one with sili-
cone. (See Figure 4.2.)
7. Install cable, fixing clamps as required.
• Crossover the incoming cables to the left and right as illustrated in Figure 4.2 and
secure them in place using cable fixing clamps.
A cable fixing clamp is a plastic clamp that is used to secure an incoming cable to the
grounding plate, a metal strap attached to the inside of the plastic cover. Cable fixing
clamps, when installed in combination with cable crossover as shown in Figure 4.2,
provide the necessary strain relief protection.
Figure 4.2
8. Affix cable cover:
• Affix the cable cover to the 8580/8590.
• Carefully follow each critical point described below during this operation:
Insert sealing plugs
with silicone
Insert sealing plugs
with silicone
Attach cable fixing
clamp
Attach cable fixing
clamp