User manual

Chapter 8: Internal Devices
Touch (PS2) for Windows XP & XP Embedded
8580/8590 Vehicle-Mount Computer User Manual 117
The computer does not need to be restarted.
8.7.1.2 Calibration
The touchscreen must be calibrated so that it functions correctly.
1. Start the touch configuration tool under Start/Programs/Hampshire TSHARC Control
Panel.
2. Choose the Calibration tab and tap the Touch field.
3. Once calibration is complete, finish by tapping Accept.
4. Choose the Click Settings tab and choose Enable right click emulation. Enter the
following values:
Right-Click Area + Double-Click Area each to 13;
Right-Click Delay + Double-Click Delay each to the third line.
5. Exit the tool with OK.
8.7.2 Touch (PS2) for Windows XP & XP Embedded
8.7.2.1 Installation
The touch drivers is stored on the Compact Flash or hard drive under Util/atouch/<verNR>
by default. In addition, you will find our drivers on the driver CD included with your unit.
1. Open the corresponding folder and run Setup.exe.
2. In the Welcome dialog tap Next.
3. In the Software License Agreement window, choose I accept all of the terms of the
above License Agreement and then tap Next.
4. In the Select Controller dialog choose PS/2 and tap Next.
5. Deselect the option in the Configuration Complete dialog and end by tapping
Finish.
6. In the following window, confirm the dialog by tapping OK.