User manual

Chapter 6: Operating System & Software Apps
Psion Teklogix Config Menus
8580/8590 Vehicle-Mount Computer User Manual 83
Common
Important: During import, not all data is checked for validity; rather, the data is
saved in the way in which it is defined in the import file. False informa-
tion could lead to failure of 8580/8590 (such as malfunctions, data loss,
equipment damage etc.).
Load factory defaults Default settings can be loaded that are saved in a file
named FactoryDefault_<Serial number>.cfg.
This file can only be generated by Psion service with a
Psion-internal program.
The AC-DC configuration warning does not appear,
as it is assumed that this is taken into account
at installation.
If the file is not available, an error message about a
‘defect’ file appears.
Show/hide the software key-
board automatically on input
fields in Psion Teklogix
Config
The software keyboard starts automatically when
Psion Teklogix Config is started. When the cursor is
placed in an input field, it is always displayed.
A file named Keyboard.cfg must exist in the software
keyboard installation directory; otherwise an error
message appears.
If the keyboard is started by Psion Teklogix Config, it
is also terminated when Psion Teklogix Config is
closed. The software keyboard version 1.5 or higher is
mandatory for this.
An error message is displayed when errors occur.
The message is only visible after logging on.
Warning with query on
import of static network data
(computer name, IP
addresses)
If static IP addresses (when DHCP is disabled) and/or
a computer name are imported, a warning with corre-
sponding security query may appear.