User manual

Chapter 6: Operating System & Software Apps
Psion Teklogix Config Menus
8580/8590 Vehicle-Mount Computer User Manual 81
Set boot command (BootCmd)
•Tap Set Command to apply the settings.
• Tap the Exec. Restart button to restart the computer and activate the settings.
6.2.3.9 Settings
In this menu, Psion Teklogix Config is configured with respect to password, language etc.
No command The set boot commands are deactivated again.
Activate write protection
(ENABLE)
Activates write protection: All system changes are written
exclusively to the main memory; they are discarded when
the computer is restarted.
To activate this setting, reboot the computer!
Deactivate write protec-
tion (DISABLE)
Disables write protection.
To activate this setting, reboot the computer!
Deactivate and take over
(DISABLE+COMMIT)
This setting is a combination of Deactivate write protec-
tion and Take over changes: Write protection is deacti-
vated; changes are applied.
Take over changes Temporarily deactivates write protection in order to
commit current changes to the system. Once finished,
write protection is immediately active again.