User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 257
Chapter 7: Peripheral Devices & Accessories
8525/8530 Mounting Recommendations
7.4.1 8525/8530 Mounting Recommendations
Warnings: Before mounting an 8525/8530 in a vehicle, there are a number of
operator safety issues that require careful attention. An improperly
mounted 8525/8530 may result in one or more of the following:
operator injury, operator visibility obstruction, operator distraction
and/or poor ease of egress for the operator. Psion Teklogix strongly
recommends that you seek professional mounting advice from the
vehicle manufacturer.
Cable routing within a vehicle cab also requires careful consider-
ation, especially for separately tethered scanners and other devices
with loose cables. If you are unable to obtain suitable advice,
contact Psion Teklogix for assistance (see "Appendix A: Support
Services and Worldwide Offices" at the end of this document). Note
also that for better protection, the equipment should be mounted
inside the vehicle roll cage.
Use of the Powered Fork Lift Cradle while charging the fork truck
battery is prohibited.
Important Safeguards
• To avoid possible injury, this device must be properly secured when in a
moving vehicle.
• Keep this device away from magnetic fields.
• Do not place the computer near a television or radio receiver.
• Do not disassemble your 8525/8530 computer—there are no user-service-
able parts inside.