User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 229

Chapter 6: Tekterm Application

Scanner

Also, when this parameter is enabled (set to “Y”), for each control character in

the serial output stream, a DLE is inserted to precede that character. The control

character is replaced with its 1’s complement.

6.20.2.6 Scanner

Cont Nxt Fld

This parameter only applies to string entry data. When enabled (set to “Y”), this

parameter allows bar codes that are longer than the field length to continue in the

next field.

If “ContNxtField” is disabled (set to “N”), OFF data will flow into the next field.

Append Enter

When enabled (set to “Y”), “Append Enter” causes an [ENTER] code to be

appended to the bar code. The [ENTER] code completes the entry of the bar code

and moves the cursor to the next field.

Append F0

When enabled (set to “Y”), this parameter causes an [F0] code to be appended to the

bar code. The [F0] code completes the entry of the bar code data in the field.

Mixed AIAG

When this parameter is enabled (set to “Y”), AIAG labels are always accepted and

processed – even if mixed with keyboard input. The AIAG label can replace the

partially entered keyboard data. If this parameter is disabled, AIAG labels are

rejected if field entry is in progress.

Cont Nxt Fld Y Y/N

Append Enter Y Y/N

Append F0 Y Y/N

Mixed AIAG N Y/N

Rjct if Alpha N Y/N

Beam Lockout N Y/N

Range

Scanner