User manual

Chapter 6: Tekterm Application

Tests

224

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual

Fill Chr

This parameter specifies the character that identifies empty entry fields. Enter

the ASCII decimal equivalent of this character. The most commonly used

characters are:

_ (underline) Enter 95

. (period) Enter 46

Note: 8525/8530s in some systems may use the “space” character with the host

using reverse video attributes to mark entry fields.

Upper Case

When this parameter is enabled (set to “Y”), lowercase input is converted

to uppercase.

6.20.2.4 Tests

AutoRep Fn

This parameter determines which function key is sent to the host in auto reply mode.

The value represents the number of the function key – not the ASCII decimal

equivalent. After sending this key, the unit locks and waits for the host to unlock the

8525/8530. To disable “AutoRep Fn”, set the “AutoRep T/O” parameter to zero.

AutoRep T/O

This parameter determines the time (in seconds) between the 8525/8530 unlocking

and the next transmission of the function key specified by the above parameter.

A value of zero disables auto reply mode.

AutoRep Fn 7 0..63

AutoRep T/O 5 0..255

Tests

Range