User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 223
Chapter 6: Tekterm Application
Characters
To choose a character set:
• Position the cursor on the appropriate item – for example, ISO – and press
[F1] to display the character set options.
• To activate a character set, press the [RIGHT] or [LEFT] arrow key to set it
to “Y”.
Important: If you choose a Chinese
character set from the ‘Misc.’ menu and
a character sent from the host cannot be displayed on the
8525/8530 screen, a shaded box character is used as a substitute.
Please review “Default font” on page 231.
If you are using a Korean
character set, a right arrow character is
used as a substitute.
V Match Chr
This parameter enables visible field matching and defines the character that identifies
visible field match data from the host. Field matching allows the host to pre-load
data into an entry field that is compared with the user’s input. The vehicle-mount
beeps if
the entered data does not match. Visible field matching means that the data to be
matched is displayed in the entry field.
Enter the decimal value for the ASCII character that will be used by the host to
identify visible match field data. Enter 0 (zero) to disable this feature.
Note: Another method of field matching is available directly through the
TESS data stream.
H Match Chr
This parameter enables hidden field matching and defines the character that identifies
hidden field match data from the host. Field matching allows the host to pre-load
data into an entry field that is compared with the user’s input. The 8525/8530 beeps
if the entered data does not match. Hidden field matching means that the data to be
matched is not displayed in the entry field.
Enter the decimal value for the ASCII character that will be used by the host to
identify hidden match field data. Enter 0 (zero) to disable this feature.
Note: Another method of field matching is available directly through the
TESS data stream.