User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 189
Chapter 6: Tekterm Application
Indicators
6.17.1.2 Indicators
When the “Indicators” parameter is enabled (set to “Y”), onscreen indicators are
displayed to indicate the operating condition of the 8525/8530. Refer to “Onscreen
Indicators” on page 41 for a list of possible indicators.
6.17.1.3 Softkeys
Enabling (setting to “Y”) the “Softkeys” parameter displays softkey labels at the
bottom of the screen to indicate the function of each softkey. To block the display of
softkey labels, set this parameter to “N”.
Softkeys are function keys which are programmed to execute specific actions when
pressed. Refer to Table 6.1 on page 158 for a list of softkey labels.
6.17.1.4 Keyboard Ctrl Panel
This menu item displays the Keyboard Properties dialog box in which you can
adjust the repeat rate of the keys, the intensity of the keyboard backlight and the
behaviour of the [BLUE] and [ORANGE] keys.
Figure 6.7 Keyboard Properties
Important: Refer to “Keyboard Properties” on page 79 for details about this
dialog box.