User manual

Chapter 6: Tekterm Application
Security Settings
184
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
The “Parameters” menu allows you to adjust the screen contrast and select a security
level. With a Supervisory or Teklogix password, you can also access the parameters
listed in the “More Parameters” sub-menu.
6.13.1 Security Settings
To access the “More Parameters” sub-menus, the “Security” parameter must be set to
either a Supervisor or a Teklogix level password. The default security level is User.
• Tap on the
Security parameter to display the Security Level dialog box.
Refer to “Security Levels” on page 59 for details about setting the security level for
your 8525/8530.
6.14 Display Options
The ‘Display’ sub-menu is used to adjust your unit’s display properties.
• Press [F1] to access the ‘Display’ sub-menu.
The Display Properties dialog box is displayed where you can adjust the
appearance, backlight and contrast of your 8525/8530 display.
Important: The "Display Properties" dialog box options are described in
detail beginning on page 76.
More Parameters » see page 185
Security see text
Display » see text
01
Parameters
Range
Backlight Ctrl Panel » see text
02
Range
Display