User manual

Chapter 5: Configuration
Removing An Existing Community
148
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
A Modify Community dialog box is displayed, listing the community you
highlighted.
•Edit the Name and/or Rights, and press [ENTER] to save your changes.
5.12.1.3 Removing An Existing Community
To remove an item:
• Highlight the community you want to remove in the Communities tab and
then choose the Remove button.
A Delete Confirmation screen is displayed.
• To remove a community, choose the Yes button, or
If you decide not to remove the community, choose the No button.
5.12.2 Trap Destination Tab
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running
on the managed node. This option allows you to define where the report will be sent.
Figure 5.88 Trap Destination Tab
5.12.2.1 Enabling Authentication TRAPS
Enabling Enable Authentication TRAPS allows authorization traps to be sent when
a failure is detected (e.g., an SNMP message received with a bad community name).