User manual

Chapter 5: Configuration
EAN 13 Settings
134
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
Note: This option is available only when ‘EAN/UCC 128’ is selected.
Variations
When using Code 128, you can choose the variation or type of bar code variation the
scanner will recognize. The options available are
Standard, UCC and EAN/UCC.
These options are described below.
Standard
Enable (set to ‘ON’) “Standard” if Code 128 is desired.
UCC 128
“UCC” is a variation of Code 128.
EAN/UCC 128
To successfully scan this type of bar code, “EAN/UCC” must be enabled (set to
‘ON’). “EAN/UCC” bar codes include group separators and start codes.
Field Size/Chars
Refer to the description beginning on page 132 for details.
5.11.2.4 EAN 13 Settings
Enabled
Set this parameter to ‘on’ to enable EAN 13 or ‘off’ to disable it.
Include Country
If this parameter is enabled (set to ‘ON’), the country code is included with the
decoded bar code data.
Include Check
If this parameter is enabled (set to ‘ON’), the check digit is included with the
decoded bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 130) must be enabled (set to ‘ON’).