User manual

Chapter 5: Configuration
Keyboard Backlight
80
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
Enable Character Repeat
Tapping in the checkbox next to this option enables the key behaviour you specify in
this dialog box.
Repeat Delay
The repeat delay chosen for this parameter determines the delay in milliseconds
between repeat characters. Sliding the Repeat Delay bar to the left increases the delay
between key repeats while sliding the bar to the right shortens the repeat delay time.
Repeat Rate
The value assigned for the Repeat Rate parameter determines how quickly the key
you press repeats and is measured in characters per second (cps). Sliding the bar to
the left slows the repeat rate, and sliding the bar to the right increases the repeat rate.
Note: Use the field at the bottom of this dialog box to test the repeat delay and
rate settings you’ve chosen.
5.5.2.2 Keyboard Backlight
•In the Keyboard Properties dialog box, open the Backlight tab.
Figure 5.8 Keyboard Backlight Properties
Intensity
This parameter is used to adjust the light intensity of the 8525/8530 keyboard
backlight. Sliding the bar to the left darkens the keyboard backlight intensity, and
sliding it to the right lightens the intensity.