User manual

Chapter 3: Get To Know NEO
Pairing a Bluetooth Device
42 NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
changing information with other Bluetooth devices and providing network access. You can
also pair your hand-set with a Bluetooth headset. Refer to “The Bluetooth GPRS Phone” on
page 186 for setup details.
3.9.1 Pairing a Bluetooth Device
Turning the Bluetooth Radio On
Before pairing a headset or any other Bluetooth device with NEO, make certain that the Blu-
etooth device power is enabled; it is enabled by default. If, for some reason, it has been
disabled:
• Tap on Start>Settings>System tab and then, tap on the Power icon to display the
Power dialog box.
• Tap on the Built-in Devices tab, and tap in the checkbox next to Enable Bluetooth.
• Next, tap on Start>Settings>Connections tab>Bluetooth icon.
• Tap on the Mode tab, and check Turn on Bluetooth. Tap OK.
• Turn your Bluetooth device on and place it within a few feet of NEO.
• If needed, set your Bluetooth device to visible (discoverable) so that the hand-held can
detect it and establish a connection.
Pairing a Device
To pair devices:
• Follow the manufacturer’s instructions to place the remote device in pairing mode.
• Choose the Devices tab, and tap on the Scan button to scan for devices in the area.
• When the scan is complete, tap and hold the stylus on the device to which you want
to pair.
• In the pop-up Device menu, tap on Pair.
Note: Headset pairing information is also available in the Getting Started Centre in the
Today screen on NEO.