User manual

Chapter 3: Get To Know NEO
Audio Indicators
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual 39
The scanner also overrides LED behaviour. The table below describes what the various LED
colours indicator when a scan is activated – a scanner button is pressed or the scanner trigger
is pulled.
If the unit is attached to an external power supply, the hand-held LED reflects the battery
charge status.
3.6.2 Audio Indicators
The audio speaker provides a variety of sounds when a key is pressed, a keyboard character
is rejected, scan input is accepted or rejected, an operator’s entry does not match in a match
field or the battery is low. To specify how you want NEO to respond under various condi-
tions, refer to “Sound & Notifications” on page 128.
3.6.2.1 Adjusting The Receiver Volume
The volume can be adjusted using the [UP ARROW] and [DOWN ARROW]. The increase
volume key is labelled with a plus symbol and the decrease volume key is la-
belled with a minus symbol.
Table 3.1 NEO Scanner LED Behaviour
LED Behaviour Scan Status
Solid Red Indicates the scanner is firing.
Blinking Red Unsuccessful decode.
Solid Green Successful decode.
Note: During the first two minutes of a battery charge, the LED remains solid yellow
while the hand-held computer status is assessed.
Ta bl e 3. 2 N E O C h a r ge L ED B e h a vi o ur
LED Behaviour Charge Status
Solid Yellow Battery charged to less than 75% capacity.
Flashing Green Battery charged to between 75% and 95% of capacity.
Solid Green Fully charged.
Flashing Yellow Temperature outside charge range (0°C to 45°C).
Solid Red Battery is not charging. Battery fault warning.