User manual

Chapter 2: Basic Checkout
Performing a Cold Reset to the Windows Mobile 6.1 OS
NEO Hand-Held with Windows Mobile 6.1 User Manual 23
Files and data stored in the RAM Drive partition are not preserved during a reset. To protect
files stored in the RAM Drive through a reset procedure, you must create a Total Recall
profile (refer to “Total Recall” on page 162) and store it on the flash (“My Device”) file
system.
• Press and hold down the [FN/BLUE] key and the [ENTER] key simultaneously for a
minimum of two seconds. When the screen goes blank, release the keys.
2.9.2 Performing a Cold Reset to the Windows Mobile 6.1 OS
A cold reset in Windows Mobile is almost identical to a warm reset, except that some lower
level hardware (PCon) is also reset before the operating system boots. For this reason, a cold
reset should only be used in rare, critical situations.
To perform a cold reset and launch the Windows Mobile 6.1 operating system (bypassing
the BooSt menu):
• Press and hold down the [SCAN] [FN/BLUE] and [ENTER] keys simultaneously for a
minimum of two seconds.
After a cold reset, the BooSt menu appears, listing possible BooSt commands.
• Type 1 to load the Windows Mobile 6.1 operating system.
Note: You do not need to reset NEO after configuring the radio.