User manual

Chapter 2: Basic Checkout
Using Microsoft ActiveSync®
NEO Hand-Held with Windows Mobile 6.1 User Manual 21
your hand-held to PCs running this software. ActiveSync works only with the Windows XP
SP2 operating system or earlier.
If the Windows® Vista® operating system is installed in your PC, ActiveSync is not re-
quired to transfer data between your hand-held and your PC.
By connecting NEO to a PC with a cable, you can:
• View NEO files from Windows Explorer.
• Drag and drop files between NEO and the PC in the same way that you would between
PC drives.
• Back up NEO files to the PC, then restore them from the PC to the hand-held again, if
needed, and so on.
2.6.1 Using Microsoft ActiveSync®
If you are using Windows XP or earlier, your data transfers require Active Sync®. To install
ActiveSync®, follow the step-by-step instructions provided at this website:
http://www.micro-
soft.com/windowsmobile/en-us/help/synchronize/default.mspx
2.6.2 Using Microsoft Windows Mobile Device Center
If you have Windows Vista or Windows 7, your data transfers do not require ActiveSync. In-
stead, you will need to download Windows Mobile Device Center. Follow the instructions at
the following website:
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/default.mspx
To transfer data between your PC and your hand-held:
• Tap on Start>Computer to display the drives. NEO will be visible there.
• Open drives, files and folders as you would on your PC.
2.7 Aligning (Calibrating) the Touchscreen
Refer to “Aligning (Calibrating) the Touchscreen” on page 37 for details.