User manual

Appendix C: Bar Code Settings
Composite
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual C-33
cannot be scanned by omnidirectional scanners. Each of these options can be turned on or
off depending on the scanner installed in your hand-held.
Length Restriction
Refer to “Length Restriction” on page C-8 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-9 for details.
C.3.19 Composite
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners.
The options available for this parameter represent multi-level components of a
composite symbol.
Enable CC-C and Enable CC-AB
To activate these components, set these parameters to on.
Linear Transmission Only
When ‘Linear Transmission Only’ is enabled, only the linear code portion of the composite
bar code is transmitted when scanned.
UPC-EAN Composite Message
This option allows you to choose how UPC-EAN shared bar codes are transmitted: Always
Linked, Never Linked or Auto-discriminate.
C.3.20 TLC-39
Enable
This composite component integrates MicroPDF417 with the linear Code 39 symbol.
Setting this parameter to on enables this parameter.
Important: To successfully read this type of bar code, the two types of symbologies
included in a composite bar code must be enabled. In addition, “Center Bar
Code Only” must be disabled.